Ortofon MC Windfeld Ti Moving Coil Cartridge

HKD 54,990.00

數量

簡介

+
全鑽石針頭, Ortofon Repl. 100 型鑽石針, 唱頭 The MC Windfeld Ti - a moving coil phono cartridge in the absolute high-end class Our extensive knowledge of vibration properties, characteristics in different shapes and materials, competences in magnetism, mechanical design and new technologies has been applied for optimization of the MC Windfeld model. The MC Windfeld Ti has gone to the next level by reducing unwanted vibrations and increasing the dynamic capability of the cartridge. Those who choose to adopt the MC Windfeld Ti will experience the lifelike, dynamic and open sound, with exceedingly clear midrange. The MC Windfeld Ti remains extremely musical while paying close attention to micro dynamic details, with its delicate, but also analytical nature. 丹麥 Ortofon Windfeld 動圈式唱頭 為表揚­ Ortofon 首席工程師 Per Windfeld 三十多年來的貢獻而取名的 MC Windfeld 唱頭,採用 8N 純銅線作線圈及 Boron 硼製針桿,於 4Ω 的內阻範圍下獲得 0.3mV 輸出。配合精細打磨的不鏽鋼外殼,使唱頭擁有極高的防震能力,絕對是重播黑膠的尖端指標。

付款、送貨及退貨

+

送貨方式

  • 香港 本地送貨
  • 國際送貨

付款方式

  • PayMe
  • 信用卡 / PayPal Wallet
  • 銀行轉帳

退貨及退款政策

聯興電業(香港)有限公司(以下簡稱本公司),為了讓您能夠安心的在本公司網站的購物,特此向您說明本網站的退換貨政策、手續及須知,以保障買賣雙方的權益,請您詳閱下列內容: 退換貨品須知 : - 如閣下於本公司網站所購買的任何商品,於收貨日/取貨日起計7天內發現貨品有非人為之明顯損毁或款式錯誤,請於7天內聯絡客戶服務主任,並提供相關的單據及產品編號以便辦理換貨。請確保商品及其包裝完整 。 - 請注意:如客戶經由 Whatsapp/Facebook 客戶服務主任協助您申請退換貨時,即表示客戶已同意本公司在網站上之完整退換貨政策、手續及須知,客戶服務主任方可為客戶代為申請退貨程序。 - 一經查核所購買的貨品符合退換條件,將有專人聯絡閣下安排相關退換程序。 - 所有於本公司購買的電子產品/電器貨品,7天內因非人為損壞或質量問題均可換貨,7天後貨品的保養與損壞,需保養或維修則須直接向代理商查詢。 - 任何電器產品,電子產品,預購產品,折扣商品,如已經開封和使用的,恕無法退回及退款,敬請見諒。 - 客戶使用後未能符合個人喜好或質素未如理想,恕不接受退貨及退款安排。 - 一般布料編織品,由於布料彈性不同,可能存在輕微尺寸誤差(請參照個別產品的資料),此屬正常情況,不能因為貨品存在輕微尺碼誤差而要求退換。 - 由於電腦螢幕的設定與解析度不同,可能會有輕微色差現象,此屬正常情況,不能因為貨品存在輕微色差而要求退換(實際顏色需以官網的實物圖為準,本公司對貨品是否存在明顯的色差問題會保留最終決定權)。 - 如發現退換貨商品並不符合完整退換貨條件,本公司會把退貨寄回至客戶之前所提供的送貨地址,而客戶需自行承擔運費。 - 如貨品已下架、出現缺貨或其它原因沒法進行更換,本公司將改以客戶付款的同樣形式全數(貨品及運費)退回給客戶。 - 客戶網上下單前請確保收件人名稱、收件人電話號碼及收件地址正確,提供錯誤的資料導致貨品延遲取貨及第三方盜竊的費用,要由客戶自行負責。 退貨及換貨程序 : 如貨物未有按照在線客服提供的指示及方法辦理退換手續,本公司保留拒絕退換之權利。 完整退貨內容必須包括以下 (缺一不可): A. 全新未拆吊牌之完整包裝貨品 (請必須摺好入回包裝袋內) B. 原裝包裝袋 C. 附屬配件 (如有) D. 收據 退換貨程序: 所有退換貨及退換尺碼,需於貨品簽收日期起的7天內進行退換申請,並且需要先拍照通知客戶服務主任相關退貨項目,並且要把貨品在7天內送到本公司。如產品之明顯損毁是非人為而是運送導致,本公司會支付退貨運費。 退換貨服務:每張訂單僅提供一次。發貨前本公司會經過仔細的質量檢查;如客人收貨後,發現有質量問題或有瑕疵的貨品,請先拍照通知客戶服務主任進行相關退貨項目。為免再爭議,客人請自行於辦理退換貨前確實驗收退貨品與您申請的退換貨品無誤,並且退換時需連退換貨單一拼寄出,需要寫明正確退換貨品編號/尺碼(如適用)及理由,再包裝好退換貨品,然後經運輸送至本店鴨寮街152號舖。 本公司(聯興電業(香港)有限公司)有權於毋須在另行通知情況下更改條款及細則,及拒絕更換產品的權利;如有任何爭議,本公司將擁有最終的決定權。 最近更新日期:2021年3月27日

商品詳情

The MC Windfeld Ti technology

The MC Windfeld Ti phono cartridge was introduced in 2017 as a continuous tribute to Ortofon's former engineer Mr. Windfeld and optimization of the MC Windfeld model launched in 2008.

At the heart of the MC Windfeld Ti lies Selective Laser Melting technology, apllied for manufacturing of the Ortofon Exclusives Series cartridges.
The use of Titanium in the MC Windfeld Ti has provided a further improvement to the overall rigidity of the structure and the cartridge weight. Obviously, MC Windfeld Ti has gone to the next level by reducing unwanted vibrations and increasing the dynamic capability of the cartridge.

In this episode Leif Johannsen, the Ortofon's Chief Acoustics and Development, accurately compares the two MC Windfeld models with the focus on the benefits of the new technologies and materials.

The mechanical integration of the MC Windfeld Ti

Historically, Ortofon has always followed its own path with regard to the mechanical design of the cartridge housing, because mechanical rigidity and total freedom from resonance in the audible range are a precondition for optimal sound quality.

In the MC Windfeld Ti the cartridge’s contact with the tonerarm takes place through three hard, well-defined contact points placed on the fastening section of the cartridge. This means that the mechanical integration of the cartridge and the tonearm arm are always absolutely perfect. 

Flexibility and performance with a range of compatibility

With optimized weight and moderate compliance to suit the majority of modern tonearms, the MC Windfeld Ti is easy compatible with an endless array of contemporary high-end turntable equipment, including the Ortofon TA-210 and TA-110 tonearms.

A low output impedance of 7 ohm and a medium output voltage of 0.2 mV makes the Ortofon MC Windfeld Ti a perfect partner for most MC pre-amps as well as step-up transformers, including the Ortofon ST-80 SE

When combined with Ortofon’s world-class knowledge in analogue sound reproduction, The MC Windfeld Ti will undoubtedly provide sound which is literally unsurpassed and simply has to be experienced.

 

你可能感興趣的商品